Muncy™ Closed Spelter Sockets-Stainless Steel
- Muncy™ 1-1/2" and smaller Rope Sockets are a grooveless design for use with polyester resin or zinc socketing compounds.
- Muncy™ 1-5/8" and larger Rope Sockets are a grooved design that meet the requirements of Federal Specifications RR-S-550.
- Specially designed retaining segments preventing rotation and pop-out of socketing compound. 1-1/2" and smaller Muncy™ Rope Sockets and all Muncy™ Strand Sockets feature these retaining segments.
- Zinc poured only when used with stainless steel Rope or Strand— Do not use with resin
| Stock No. | Rope Size (inch) |
Strand Size (inch) |
Dimensions
|
Ultimate Load (tons) |
Min Socketing Media (lbs.) |
Weight lbs. Each |
|||||||
| A | E | J | K | L | N | Q | W | ||||||
| R-201SS | 5/16" -3/8" | - | 4.88 | 0.38 | 2.25 | 0.69 | 2.00 | 0.63 | 0.50 | 0.94 | 11 | 0.2 | 1 |
| R-202SS | 7/16" - 1/2" | - | 5.44 | 0.44 | 2.50 | 0.88 | 2.25 | 0.69 | 0.56 | 1.13 | 15 | 0.4 | 1.4 |
| R-203SS | 9/16" - 5/8" | 1/2" | 6.31 | 0.63 | 3.00 | 1.00 | 2.50 | 0.81 | 0.69 | 1.38 | 21 | 0.6 | 3 |
| R-204SS | 3/4" | 9/16" - 5/8" | 7.56 | 0.69 | 3.50 | 1.25 | 3.00 | 1.06 | 0.81 | 1.63 | 34 | 1.0 | 4.5 |
| R-205SS | 7/8" | 11/16" - 3/4" | 8.75 | 0.88 | 4.00 | 1.50 | 3.50 | 1.25 | 0.94 | 1.88 | 49 | 1.5 | 7 |
| R-206SS | 1" | 13/16" - 7/8" | 9.87 | 0.94 | 4.50 | 1.75 | 4.00 | 1.38 | 1.13 | 2.25 | 62 | 2.5 | 11 |
| R-207SS | 1-1/8" | 15/16" - 1" | 11.01 | 1.00 | 5.00 | 2.00 | 4.50 | 1.50 | 1.25 | 2.50 | 77 | 3.6 | 16 |
| R-208SS | 1-1/4" - 1-3/8" | 1-1/16" - 1-1/8" | 12.13 | 1.13 | 5.50 | 2.25 | 5.00 | 1.63 | 1.50 | 2.75 | 92 | 4.8 | 22 |
| R-209SS | 1-1/2" | 1-3/16" - 1-1/4" | 13.94 | 1.13 | 6.00 | 2.50 | 6.00 | 1.94 | 1.63 | 3.13 | 125 | 6.7 | 28 |
| R-210SS | 1-5/8" | 1-5/16" - 1-3/8" | 15.13 | 1.25 | 6.50 | 2.75 | 6.50 | 2.13 | 1.75 | 3.25 | 163 | 8.2 | 36 |
| R-211SS | 1-3/4" - 1-7/8" | 1-7/16" - 1-5/8" | 17.25 | 1.61 | 7.50 | 3.00 | 7.56 | 2.19 | 2.00 | 3.53 | 167 | 12.0 | 58 |
CAUTION
Stainless Spelter sockets are recommended for use on 6x7, 6x19, and 6x37, IPS, XIP (EIP), RRL, FC, or IWRC wire ropes. Before using stainless steel spelter sockets with other type, lay, construction, or grade of wire rope, it is recommended that the termination be tested to prove the adequacy of the assembly in the intended application. Do not use Resin socketing media with stainless steel spelter sockets. Assembly by Zinc pouring should always be performed by trained and competent personnel only. Proper assembly practices are the assembly manufacturer’s responsibility.
- Open Rope Spelter Sockets
- Stainless Steel Open Rope Spelter Sockets
- Flat Rope Spelter Sockets
- Open Strand Spelter Sockets
- Closed Strand Spelter Sockets
- Type 6 Anchor Sockets
- Type 7 Anchor Sockets
- Type 8 Anchor Sockets
- Open Boom Pendant Sockets
- Closed Boom Pendant Sockets
- Vibration Dampening Fittings
